Butyric acid, 2-(p-chlorophenyl)-3-methyl-
4-Chloro-A-(1-Methylethyl) Benzene Acetic Acid
CAS: 2012-74-0
Molecular Formula: C11H13ClO2
Butyric acid, 2-(p-chlorophenyl)-3-methyl- - Names and Identifiers
Butyric acid, 2-(p-chlorophenyl)-3-methyl- - Physico-chemical Properties
| Molecular Formula | C11H13ClO2 |
| Molar Mass | 212.67 |
| Density | 1.184±0.06 g/cm3(Predicted) |
| Melting Point | 87-88℃ |
| Boling Point | 318.7°C at 760 mmHg |
| Flash Point | 146.5°C |
| Vapor Presure | 0.000148mmHg at 25°C |
| Appearance | White-like crystal |
| pKa | 4.13±0.10(Predicted) |
| Storage Condition | Sealed in dry,Room Temperature |
| MDL | MFCD00037763 |
| Physical and Chemical Properties | Chemical properties 3-methyl -2-(4-chlorophenyl) butyric acid industrial products are light yellow or brown solid, pure products are white diamond columnar crystals, m.p.88 ~ 89 ℃, easily soluble in benzene, toluene, alcohol, acetone and other organic solvents, slightly soluble in water. |
| Use | Use 3-methyl -2-(4-chlorophenyl) butyric acid is referred to as butyric acid, fenvalerate, valerate, brommethrin is an important intermediate. Pesticide intermediates. |
Butyric acid, 2-(p-chlorophenyl)-3-methyl- - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. |
| WGK Germany | 3 |
| RTECS | ES8450000 |
Butyric acid, 2-(p-chlorophenyl)-3-methyl- - Upstream Downstream Industry
Butyric acid, 2-(p-chlorophenyl)-3-methyl- - Introduction
4-choro-a-(1-methyllethyl) Benzene Acetic Acid, the chemical formula is Cl-C6H4-CH(C3H7)COOH, often abbreviated as CIPP. The following is an introduction to some of its properties, uses, methods and safety information:
Nature:
1. Appearance: colorless or light yellow crystal.
2. Solubility: Soluble in organic solvents such as methanol, ethanol and Ether solvents, insoluble in water.
3. Melting Point: about 34-36 ° C.
4. Molecular Weight: about 208.66g/mol.
Use:
1. CIPP can be used as raw materials and intermediates in organic synthesis.
2. As a pharmaceutical intermediate, can be used in the manufacture of certain drugs, such as sympathomimetic amines, hormones, non-steroidal anti-inflammatory drugs.
3. Can be used as inhibitors and stabilizers of certain polymers.
Method:
The preparation of CIPP can be obtained by chlorination of α-isopropyl benzene acetic acid. The specific preparation process will involve chemical synthesis techniques and needs to be carried out in a laboratory or industrial environment.
Safety Information:
1. CIPP is an organic compound and is dangerous. In the use or preparation process should follow the relevant safety procedures and personal protective measures, avoid contact with skin, eyes and respiratory tract.
2. The potential hazards to the human body have not been fully understood. Please follow the safe operation guidelines and consult professionals when necessary.
3. In the storage and handling of CIPP, should be sealed storage, and away from the fire and oxidant.
Nature:
1. Appearance: colorless or light yellow crystal.
2. Solubility: Soluble in organic solvents such as methanol, ethanol and Ether solvents, insoluble in water.
3. Melting Point: about 34-36 ° C.
4. Molecular Weight: about 208.66g/mol.
Use:
1. CIPP can be used as raw materials and intermediates in organic synthesis.
2. As a pharmaceutical intermediate, can be used in the manufacture of certain drugs, such as sympathomimetic amines, hormones, non-steroidal anti-inflammatory drugs.
3. Can be used as inhibitors and stabilizers of certain polymers.
Method:
The preparation of CIPP can be obtained by chlorination of α-isopropyl benzene acetic acid. The specific preparation process will involve chemical synthesis techniques and needs to be carried out in a laboratory or industrial environment.
Safety Information:
1. CIPP is an organic compound and is dangerous. In the use or preparation process should follow the relevant safety procedures and personal protective measures, avoid contact with skin, eyes and respiratory tract.
2. The potential hazards to the human body have not been fully understood. Please follow the safe operation guidelines and consult professionals when necessary.
3. In the storage and handling of CIPP, should be sealed storage, and away from the fire and oxidant.
Last Update：2024-04-09 02:00:44
Supplier List
Spot supply
Product Name: Loxoprofen Impurity 129 Visit Supplier Webpage Request for quotationCAS: 2012-74-0
Tel: 0714-3999186
Email: 2853786052@qq.com
Mobile: 86+15671228036
QQ: 2853786052
Wechat: 15671228036
Product Name: Alpha-Isopropyl-4-Chlorophenylacetic Acid Visit Supplier Webpage Request for quotation
CAS: 2012-74-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 2012-74-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Spot supply
Product Name: Loxoprofen Impurity 129 Visit Supplier Webpage Request for quotationCAS: 2012-74-0
Tel: 0714-3999186
Email: 2853786052@qq.com
Mobile: 86+15671228036
QQ: 2853786052
Wechat: 15671228036
Product Name: Alpha-Isopropyl-4-Chlorophenylacetic Acid Visit Supplier Webpage Request for quotation
CAS: 2012-74-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 2012-74-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History
Raw Materials for Butyric acid, 2-(p-chlorophenyl)-3-methyl-
4-Chlorotoluene
2-Bromopropane
4-Chlorobenzyl chloride
2-Chloropropane
4-Chlorobenzyl cyanide
2-(4-CHLOROPHENYL)-3-METHYLBUTYRONITRILE
2-Bromopropane
4-Chlorobenzyl chloride
2-Chloropropane
4-Chlorobenzyl cyanide
2-(4-CHLOROPHENYL)-3-METHYLBUTYRONITRILE
Downstream Products for Butyric acid, 2-(p-chlorophenyl)-3-methyl-